Beko GNE 134620 X Manuel D’Utilisation

EN

22

You can install the egg holder to the 
desired door or body shelf.
Never store the egg holder in the freezer 
compartment

 Sliding body shelves can be pulled 
by slightly lifting up from the front and 
moved back and forth. They come to a 
stop point when pulled towards front to 
allow you reach the foods placed at the 
back of the shelf; when it is pulled after 
slightly lifted upwards at the second stop 
point, the body shelf will be released.
The shelf should be hold tightly from the 
bottom as well in order to prevent it from 
tipping over. The body shelf is placed on 
the rails at the sides of the refrigerator 
body by bringing it to one lower or one 
upper level.
The body shelf should be pushed 
backwards to seat it completely.

Crisper of your refrigerator is designed 
specially to keep your vegetables 
freshly without loosing their humidity. 
For this purpose, cool air circulation 
occurs around the crisper in general. 
Remove the door shelves that align 
with the crisper before removing the 
crispers.  You can remove the crispers 
as illustrated in the figure.

 0 °C compartments enable the foods 
to be frozen become ready for freezing. 
You can also use these compartments to 
store your food at a temperature a few 
degrees below the fridge compartment.
You can increase the inner volume of 
your refrigerator by removing any of 
the  0 °C compartments. To do this, 
pull the compartment towards yourself; 
the compartment will lean against the 
stopper and stop. This compartment will 
be released when you lift it about 1 cm 
and pull it towards yourself.