Crane Merchandising Systems 673 Manuel D’Utilisation
HDC II Programming Guide
Basic Setup
July, 2003
10
6730018
SET PRINTER OR DEX OPTIONS
1.
Follow the steps in "Gain Access To The Supervisor Mode", PAGE 7.
2.
Press
, then
until the display shows:
PRINTER - means that data will be sent directly to a printer,
- OR -
DEX ONLY means that data remains in memory after it is downloaded into a
portable data collection device (PDCD),
portable data collection device (PDCD),
- OR -
DEX+CLR means that resettable data is cleared after it is downloaded into a
PDCD.
PDCD.
- OR -
NR DEX - a special DEX option. All sales data will become non-resettable.
Consult your DEX supplier before choosing this option.
Consult your DEX supplier before choosing this option.
3.
Press
to change between the three choices.
4.
CONTINUE.
SELECT PRINTER BAUD RATE
(PRINTER MODE ONLY)
(PRINTER MODE ONLY)
1.
Press
. One of the following is displayed:
BAUD 1200 BAUD 2400 BAUD 4800 BAUD 9600
2.
Press
until the correct baud rate for your printer is displayed.
3.
CONTINUE.
BAUD
RATE
RATE
The speed of data transfer, expressed in bits per second.
Your printer can receive data at a certain rate, and you must
tell the machine what that rate is.
Your printer can receive data at a certain rate, and you must
tell the machine what that rate is.