VillaWare NDVLCB0100 Manuel D’Utilisation

Page de 12
villaware.com
villaware.com
villaware.com
villaware.com
Remove all packaging materials and  
any promotional labels or stickers  
from your Blender. 
Be sure all parts (listed under Features) 
of your new appliance have been 
included before discarding any 
packaging materials. You may want  
to keep the box and packing  
materials for use at a later date.
Before using your VillaWare® Blender  
for the first time, remove any dust  
from shipping by wiping the base,  
cover, and controls with a damp cloth.
Jar Assembly
1
    Turn jar upside 
down so the 
small opening  
is at the top. 
2
    Place sealing 
ring over jar 
opening. 
3
    Place blade  
into jar. 
4
    Place threaded jar nut over blade and 
jar. Place the threaded jar nut on jar 
and turn it clockwise to tighten. 
5
    Place jar assembly 
onto base.
how To:
Before Use:
6
   Place ingredients into jar according 
to your recipe. For best results always 
add liquids first when blending.
7
    Place lid on jar. 
8
    make sure knob is pointing to OFF 
position, then plug the power cord 
into a 120 Volt AC electrical outlet.
Note: Avoid contact with blades and 
moveable parts.
Speed Modes
   To blend 
in high 
Speed, dial 
Control knob 
clockwise to 
the farthest 
setting.
   To blend 
in medium 
Speed, dial Control knob clockwise 
halfway through the speed selection.
   To blend in Low Speed, dial Control 
knob clockwise ¼ of the way through 
the speed selection.
   To Stop blending, turn left to “OFF”. 
The motor will come to a stop. 
   You can move between speeds at any 
time while blending by turning the 
Control knob left or right. The new 
speed will start without interruption. 
   Turn Control knob counterclockwise 
to the “PULSE” setting will give a 
momentary pulse at high speed. The 
motor will then stop when released.
to Use the Pulse Setting
The “PULSE” setting momentarily 
activates the blender at hIGh speed. 
You may also continuously move the 
Control knob to “PULSE”.
   To pulse, turn the Control knob 
counterclockwise to “PULSE” to 
activate a momentary high speed. 
The blender will run at high speed as 
long as you hold the knob. The motor 
will stop when you release the knob.
Tips:
Tips:
   Put liquids in the jar first, unless a 
recipe says otherwise.
   Crushing ice: Crush approximately  
3 cups of ice at a time with 2 cups  
of liquid for optimal results.
   Do not remove the lid while in use. 
Remove filler cap to add smaller 
ingredients. 
   This blender has been designed to 
gently process foods when operating 
at low speeds. If blades do not rotate 
during operation, simply choose a 
higher speed.
4
5
PULSE
OFF