Smeg LSA14X7 Manuel D’Utilisation

 

 

 

 

Turbine flow-regulator malfunction  
(for the relevant models only) 

The appliance is not able to "measure" the amount 
of water loaded accurately. Interrupt the program 
and switch off the dishwasher. Switch the 
dishwasher back on, program it again and start 
the washing cycle. If the problem persists, contact 
the after-sales service.

 

Alternate washing system malfunction 
Interrupt the program and switch off the dishwasher. 
Switch the dishwasher back on, program it again and 
start the washing cycle. If the problem persists, 
contact the after-sales service. 

Water intake system malfunction 
Contact the after-sales service. 

 
 

 
 

If an alarm occurs the appliance interrupts the program in progress and 
signals a fault. 

 

• 

Alarms  E1, E2, E3, E4, E8 and  E9 interrupt the current program 
immediately. 

• 

The  E5,  E6 alarms interrupts the running program once the cause is 
resolved, it will bring bach the execution of the program. 

• 

The alarm E7 is visualized at the end of the cycle that comes, however, 
brought to the end since the operation of the dishwasher is not harmed. 

To “reset” an alarm is necessary: 

 

• 

Open and close the door, or turn off and on the machine. At this point is 
possible to program the dishwasher again.