Smeg LSP1449N Manuel D’Utilisation
User instructions
3.2 Washing programs
The dishwasher is equipped with a control panel, described in chapter
"3. Description of the controls", from which it is possible to carry out all
the power switch-on, switch-off and programming operations.
"3. Description of the controls", from which it is possible to carry out all
the power switch-on, switch-off and programming operations.
Before starting a washing program make sure that:
•
•
The water supply tap is open.
•
The correct amount of detergent has been added to the
dispenser.
dispenser.
•
The baskets have been correctly loaded.
•
The spray arms are able to rotate freely and without
obstruction.
obstruction.
•
The dishwasher door is securely closed.
LIGHTING
When the ON/OFF button (1) is pressed, the dishwasher switches on
and the light (6) comes on. About 2 seconds later, the
PHASES/PROGRAM lights (10) will come on.
When the ON/OFF button (1) is pressed, the dishwasher switches on
and the light (6) comes on. About 2 seconds later, the
PHASES/PROGRAM lights (10) will come on.
PROGRAMMING
In this model of dishwasher, all programming procedures can only be
carried out with the door closed. As long as the door is open, the
PROGRAMS lights (7) and PHASES/PROGRAM lights (10) will remain
off.
In this model of dishwasher, all programming procedures can only be
carried out with the door closed. As long as the door is open, the
PROGRAMS lights (7) and PHASES/PROGRAM lights (10) will remain
off.
12