Smeg LSA643XPQ Manuel D’Utilisation

 

 

 

 

The dishwasher is equipped with a self-diagnostics system that is 
capable of detecting and signalling a number of possible faults. 

 

The anti-flooding system (where present) has been tripped service. 

The water level limitation system has tripped. 

The appliance cannot heat the water. 

The temperature sensor is disconnected. 

The appliance cannot take in the water.  

The appliance cannot drain the water from the tank. 

The dishwasher cannot measure the precise water quantity that has 
been loaded. 

Problem on the water distribution system to the baskes. 

Water intake system malfunction. 

 
 

• The 

E1,  E2,  E3,  E4,  E8,  E9 alarms provoke the “forcing” to end 

cycle of the running program. 

• The 

E5, E6 alarms interrupts the running program once the cause is 

resolved, it will bring bach the execution of the program. 

• The 

alarm 

E7 is visualized at the end of the cycle that comes, 

however, brought to the end since the operation of the dishwasher is 
not harmed. 

 
To “reset” an alarm is necessary: 

 

•  Open and close the door, or turn off and on the machine. At this 

point is possible to program the dishwasher again.