Smeg DF410BL1 Manuel D’Utilisation
User instructions
11
3.3 Washing programs
The dishwasher is equipped with a control panel and an INFORMATION
DISPLAY (9) from which it is possible to carry out all the power switch-
on, switch-off and programming operations.
DISPLAY (9) from which it is possible to carry out all the power switch-
on, switch-off and programming operations.
Before starting a washing program make sure that:
•
•
The water supply tap is open.
•
The correct amount of detergent has been added to the
dispenser.
dispenser.
•
The baskets have been correctly loaded.
•
The spray arms are able to rotate freely and without
obstruction.
obstruction.
•
The dishwasher door is securely closed.
LIGHTING
Pressing the ON/OFF button (1) will start the dishwasher and will lit up
the dishwasher pilot light (6). After approximately 3 second from this
operation the DISPLAY (8) will be turned on with a visualization that will
depend upon the state of the dishwasher.
Pressing the ON/OFF button (1) will start the dishwasher and will lit up
the dishwasher pilot light (6). After approximately 3 second from this
operation the DISPLAY (8) will be turned on with a visualization that will
depend upon the state of the dishwasher.
PROGRAMMING
In this dishwasher model all the programming operations are possible
only with closed door. With open door, on the DISPLAY (8) will appear
the symbols -- and the PILOT LIGHT PROGRAMS (7) remains out.
In this dishwasher model all the programming operations are possible
only with closed door. With open door, on the DISPLAY (8) will appear
the symbols -- and the PILOT LIGHT PROGRAMS (7) remains out.