Smeg STC700 Manuel D’Utilisation
User instructions
25
5. Cleaning and maintenance
Before carrying out any work, always disconnect the appliance
from the electrical power supply.
from the electrical power supply.
5.1 General warnings and recommendations
Avoid the use of acidic or abrasive detergents.
Clean the outer surfaces and door-lining of the dishwasher regularly
using a soft cloth moistened with water or with a normal detergent
suitable for painted surfaces. Clean the door gaskets with a damp
sponge. Periodically (once or twice a year) it is advisable to clean the
tank and gaskets, using a soft cloth and water to remove any deposits.
Clean the outer surfaces and door-lining of the dishwasher regularly
using a soft cloth moistened with water or with a normal detergent
suitable for painted surfaces. Clean the door gaskets with a damp
sponge. Periodically (once or twice a year) it is advisable to clean the
tank and gaskets, using a soft cloth and water to remove any deposits.
CLEANING THE WATER INTAKE FILTER
The water intake filter A located at the outlet of the water supply tap
needs to be cleaned periodically.
After having closed the water supply tap, unscrew the end of the water
intake hose, remove the filter A and clean it delicately under running
water. Reassemble filter A in its seat and carefully screw the water
intake hose back into position.
The water intake filter A located at the outlet of the water supply tap
needs to be cleaned periodically.
After having closed the water supply tap, unscrew the end of the water
intake hose, remove the filter A and clean it delicately under running
water. Reassemble filter A in its seat and carefully screw the water
intake hose back into position.
CLEANING THE SPRAY ARMS
The spray arms can be easily removed for periodic cleaning of the nozzles,
to prevent possible clogging. Wash them under running water and carefully
replace them in their seats, checking that their rotary movement is in no
way impeded.
To remove the orbital spray arm assembly, take hold of the longer arm and
pull the orbital unit upward. Wash the arms under a jet of running water and
return them carefully to their seat. After reassembly, check that the spray
arms turn freely. Otherwise, check that they have been installed correctly.
The spray arms can be easily removed for periodic cleaning of the nozzles,
to prevent possible clogging. Wash them under running water and carefully
replace them in their seats, checking that their rotary movement is in no
way impeded.
To remove the orbital spray arm assembly, take hold of the longer arm and
pull the orbital unit upward. Wash the arms under a jet of running water and
return them carefully to their seat. After reassembly, check that the spray
arms turn freely. Otherwise, check that they have been installed correctly.