Smeg ST1146SE Manuel D’Utilisation

Page de 48
User instructions 
22
Assisted programming (Wizard)
x Press 
(D) or (E) in repetition to display 
the type of dirt on the dishes, on the top 
line of the DISPLAY (G)
.
x Press 
(B) or (C) to confirm the selection and continue programming. 
Choose the type of wash following the procedures described above (D or 
E to display the selections available, B or C to confirm). 
At the end of assisted programming, the DISPLAY (G) shows "Wait 
please...
" and a few seconds later you will be offered the option 
selection function (button B/C to accept, D/E to reject). 
Refer to the "OPTIONS" section to view the possibilities available. 
 Standard 
programming 
Select "No" (key B) to disable assisted  programming and the system 
will offer the last program performed. 
To start this program, simply close the door (buzzer sounds, if 
enabled). 
To select another program, press (B) in repetition until the program 
required is displayed; to start this program close the door (buzzer 
sounds, if enabled). 
See TABLE OF PROGRAMS on following pages. 
At the end of the assisted or standard 
programming procedure, the programmed 
duration of the washing cycle, in minutes, 
appears on the bottom line of the DISPLAY 
(G)
.
x
The temperature which appears before the program's name 
indicates its type (e.g. 45° delicate programs, 55° economy, 65° 
intensive, etc.); the actual temperature is displayed, stage by stage, 
while washing is in progress. 
x
Programs' duration, temperature and consumption figures are 
guideline, since they depend on various factors, such as type of 
load, intake water temperature, room temperature, etc.