Cuisinart DTC-950 Manuel D’Utilisation

Page de 8
2
IMPORTANT UNPACKING
INSTRUCTIONS
Place the box on a large, sturdy, flat surface. Lay the box on its side.
Slide the packaged unit out of the box. Remove the foam insert and 
the cardboard insert. Now remove the carafe from the coffeemaker.
Remove the carafe from its cardboard packaging. Carefully lift the 
coffeemaker from the remaining inserts. Remove the plastic bag from
the coffeemaker. We suggest you save all packing materials in the
event that future shipping of the machine is needed. Keep all plastic
bags away from children.
TABLE OF CONTENTS
Important Safeguards
p.1
Unpacking Instructions
p.2
Introduction
p.2
Using the Programming Feature
p.2
Coffee Preparation
p.3
About the Thermal Carafe
p.4
Cleaning and Maintenance
p.4
Features and Benefits
p.5
Warranty
p.6
INTRODUCTION
The Cuisinart
®
Thermal Carafe Coffeemaker is a coffee lover’s dream. 
It delivers the freshest coffee in the world. The secret? The patented lid.
Coffee brews and pours through without ever having to open or turn the
lid. Flavor and heat are sealed in. Now, you can program your 
coffeemaker to start brewing when you want. Simply set the desired
brew time, fill the reservoir with water, put in your filter, add ground 
coffee and press the “ON” button. In minutes, you’ll have a wonderfully
fresh pot of coffee.
We know the Cuisinart
®
Thermal Carafe Coffeemaker will bring you 
years of pleasure. Nothing is more satisfying than a rich cup of 
your favorite brew.
DESCRIPTION OF PARTS
Your thermal carafe coffeemaker brews fresh, filtered coffee in minutes.
The thermal carafe contains a vacuum-sealed glass inner liner which
delivers heat retention superior to other containers used with drip 
coffeemakers, and helps keep full coffee flavor.
Reservoir Cover
Stainless Steel Thermal Carafe
Swing-Out Filter Basket
Brew-Through Lid
Water Level Indicator
Pause & Serve 
Programmable Control Panel
Carafe Platform
PREPARATION FOR USE
Before first use, clean the thermal carafe coffeemaker by completing a
brew cycle as described below, without using coffee or coffee filter.
USING THE PROGRAMMING FEATURE
To Set The Clock
To set the time, press and hold the hour or minute button for two 
seconds. “Time set” starts flashing in the upper left hand corner of the
LCD screen. 
Press the hour button to advance the clock to the desired time. 
The hour numeral moves in one hour increments. When numeral passes
12 am, the “PM” indicator will illuminate in the lower left hand corner of
the 
LCD screen.
Press the “minute” button to advance the minutes to the desired time.
Minutes move in one second increments.
When complete, press the hour button again, or wait for 15 seconds
and your time change will be accepted.