Hamilton Beach 49983 Manuel D’Utilisation

 5

How to Use Single-Serve Side – 

Brewing Single-Serve Packs

2

Plug in coffee maker. Rotate brew 

selector dial to the right to select 

Single-Serve ( ). Press 

OPTIONS button to select .

w

 

To avoid contact with hot coffee or water:

• DO NOT use more than 10 oz. (296 ml) of water for single-serve pack or 14 oz. (414 ml) for grounds. Too much water causes ERR message 

and long beep. SOLUTION: Place carafe on warming plate. Turn brew selector dial to Carafe ( ). Press 

l/O button to remove water. Turn 

brew selector dial to single-serve side ( ). Add correct amount of water to water reservoir. Start brew process.

• Fill reservoir with cup or travel mug of water into which the coffee will be brewed.

• Fully insert cup or travel mug under brew basket.

• For best results, use K-Cup

®

* packs.

• The unit will only brew on one 

side at a time.

• For Hotter Coffee: Rinse the 

mug with hot water before 

brewing. 

• The Brew Mode selection will 

stay in the last mode used, 

unless unplugged.

• Coffee may continue to drip 

after brewing is complete (after 

3 beeps) when using finely 

ground coffee.

• Programming mode cannot be 

used on Single-Serve side.

3

Remove brew basket. Place a 

pack into the single-serve pack 

holder. 

w

 

 Cut Hazard: Single-

serve pack holder has a sharp 

blade. Handle with care.

1

Fill reservoir with cup or travel mug 

into which the coffee will be brewed 

(maximum 10 oz. [296 ml] water).