Jura Capresso 13422 Manuel D’Utilisation

37

5 Permanent settings in programming mode

You can reset the values of all products individually to the works set-
ting.

Example: Proceed as follows to reset the values of 1 espresso and 
2 espressi to the works setting.
Precondition: The IMPRESSA must be switched off (standby).

 

T Press the Rotary Switch and the Espresso button for two sec-

onds at the same time until 

 appears.

The values of 1 espresso and 2 espressi are then reset to the 
works setting. The IMPRESSA must be switched off 
(standby).

An energy-saving mode (Energy Save Mode, E.S.M.

©

) permanent 

setting can be made with the 

 programme item:

 Z

 U

All coffee products as well as hot water can be prepared 
without having to wait.

 U

The machine heats up before preparing cappuccino or 
milk.

 Z

 U

Approx. 5 minutes after the last preparation the IMPRESSA 
switches to the energy-saving temperature and is not ready 
for use.

 U

Before coffee, hot water or milk can be prepared, the machine 
heats up. 

Example: Proceed as follows to change the energy-saving mode 
from 

 to 

.

Precondition: 

 is displayed.

 

T Open the cover of the Rotary Switch.

 k T Keep the Rotary Switch pressed until 

 appears.

 g T Turn the Rotary Switch until 

 is displayed.

 k T Press the Rotary Switch to enter the programme item.

 g T Turn the Rotary Switch until 

 is displayed.

 k T Press the Rotary Switch to confirm the setting.

 appears briefly on the display to confirm the setting.

Resetting the products to 
works settings 

Energy-saving mode