Jura Capresso 13422 Manuel D’Utilisation

43

6 Maintenance

 k T Press the Rotary Switch to initiate the rinse operation.

Rinsing stops automatically and your IMPRESSA is then 
ready for use.

 

T Close the cover of the Rotary Switch.

 

E After 50 litres of water have flowed through, or after two 

months, the filter will cease to work. Your IMPRESSA will auto-
matically prompt you to change the filter.

 

E If the CLARIS filter cartridge is not activated, you will not be 

prompted to change the filter.

 

@ You can also try out ‘changing the filter’ online. Visit the 

Knowledge Builder at www.jura.com.

To change the CLARIS filter cartridge when prompted to do so by 
your IMPRESSA, proceed as follows:

Precondition: 

 / 

 is displayed and the mainte-

nance button c lights up.
 c T Press the maintenance button.

 

T Remove the water tank and empty it.

 

T Open up the cartridge holder and remove the old CLARIS fil-

ter cartridge.

 

T Insert a new CLARIS filter cartridge into the water tank, 

pressing it slightly.

 

T Close the cartridge holder. It will click into place audibly.

 

T Fill the water tank with fresh, cold water and reinsert.

 

T Place a receptacle (at least 500 ml) under the frother.

 

E If you are using the Professional Cappuccino Frother, set the 

selection lever of the frother to the steam position n.

 c T Press the maintenance button.

 – Water will flow out of the frother.

Filter change  

Change following a prompt