KitchenAid KCM0402ER Utilisation Et Entretien

7

NOTE: Brew one mug of fresh, cool water 

and discard before brewing the first mug of 

coffee (first time use only).

1.  Remove the water tank and fill with 

enough fresh, cool water to make the 

desired amount of coffee. When replacing 

the tank, make sure to align it with the 

tab(s).

     NOTE: The tank can be filled without 

removing the tank from the coffee maker. 

2.  After filling the water tank, place the 

thermal travel mug in the coffee maker.

    To maximize coffee temperature, it is 

recommend that brew coffee with the lid 

already placed on the mug. Make sure that 

the lid is centered. You may also fill the 

mug with hot tap water for 30 seconds to 

preheat for hotter coffee temperatures.

    NOTE: The coffee maker is capable of 

brewing into most tall-sided coffee mugs.

3.  Open the brew basket door. Brew basket 

may be removed, but can be filled without 

removing it from the front of the coffee 

maker.

4.  Insert a #2 Cone paper filter or the Gold 

Tone permanent filter into the brew 

basket.

     IMPORTANT: Do not use both types of 

filters at the same time. Using both filters 

might cause water and coffee to overflow 

the brew basket.

5.  Fill the filter with one level tablespoon of 

ground coffee for each 6 oz. desired. Use 

a medium grind appropriate for automatic 

drip coffee makers.

     NOTE: Too fine a grind produces 

bitterness and may clog the coffee filter.

     IMPORTANT:Always place the filter and 

coffee into the removable brew basket. 

Do not operate the coffee maker without 

the brew basket in place.

6.  Even out the bed of coffee. If the brew 

basket is removed, place the mounting 

holes over the pins in the door and seat 

it securely in the door. Be sure the brew 

basket door is fully closed before brewing.

7.  Press the ON button to begin brewing 

coffee.

8.  The coffee maker will sound the end-of-

brewing tone when brewing is complete.

     NOTE: The outside of the travel mug  

will be hot to the touch after brewing.

9.  Repeat this procedure to brew additional 

mugs of coffee. Always turn off the coffee 

maker and allow it to cool for 5 minutes 

before starting the next brew cycle.

Wash the brew basket, Gold Tone permanent 

filter, and travel mug in hot, soapy water, 

then rinse with clean water and dry. Do not 

use abrasive cleansers or scouring pads.

W10491893A_EN.indd   7

7/10/12   12:09 PM