Cuisinart B70 Manuel D’Utilisation

13

simply press the Power Button and you can 

brew as soon as the water is heated and the 

“READY TO BREW” indicator is displayed on  

the LCD Control Center. NOTE: The On time and 
Off time functions operate independently from 

one another. To cancel either function, follow the 
steps above and use the “H” and “M” Buttons to 
advance to 12:00 AM. When you reach 12:00 AM, 

the Control Center will indicate “OFF” and the 
function will be disabled (fig. 15).

NOTE: The Auto Off timer and the On/Off Time 

programming options operate independently, 

but can also be programmed to work together. 
For example, you can set the On Time function to 
turn on at 7:00 AM and then set the Auto Off timer 
function to turn off the Brewer two hours after 
the last brew.

SECTION 3

  

Cleaning & Maintenance

SECTION 2

Controls & Indicators (LCD Control Center)

12

The Brewer brews at a preset temperature of 192°. You can adjust this 

temperature down by 5 degrees if you prefer a cooler cup of coffee, tea  

or hot cocoa. Simply follow the instructions below.

 1.

  Press the MENU Button on the LCD Control 

Center five times to program the Brew 

Temperature feature.

 2.

  The LCD Control Center will now display the 

programming options with a small arrow next 
to “SET BREW TEMP” (fig. 16). Also, the 
temperature 192° (initial setting) will be 
displayed at the top of the LCD Control Center 
to indicate the current temperature setting.

  3   .

  A minus sign will appear over the Left Button 

and/or a plus sign over the Right Button. Use 
these Buttons to raise or lower the temperature 
one degree at a time.

 4.

  Once you have reached your desired brew 

temperature, press the MENU Button twice to 

exit the programming mode. “BREW TEMP SET” 

will be indicated in the LCD Control Center if you 
have changed it from 192°.

-

+

 5.

  To change the brew temperature again, repeat steps 1 through 3 to 

change the temperature up or down, remembering that the temperature 
can only be between 187° and 192° . NOTE: At high altitudes (over 5,000 

feet), if boiling occurs, use the temperature adjustment (+0 and -5 degrees)  
to lower the temperature.

    The Brewer is preset with the Small Mug  

(7.25 oz.) as the default brew size. The default 
brew size allows the user to avoid scrolling 
through brew sizes if a particular size is  

chosen most often.

    To change the default brew size to your  

desired brew size:

 1.

  Press the MENU Button six times.

 2.

  Using Left and Right Buttons, select your 

desired default brew size (fig. 17). 

 3.

  Once the desired default brew size is selected, 

press the MENU Button once to exit. The LCD 
Control Center will indicate the brew size set.

Regular cleaning of the Brewer’s external components is recommended.

 1.

  Never immerse the Brewer in water or other liquids. The Housing  

and other external components may be cleaned with a soapy, damp,  
non-abrasive cloth.

 2.

  The Drip Tray can accumulate up to 12 oz. of overflow. The Drip Tray  

and Drip Tray Plate should be periodically inspected and rinsed clean.  

To remove the Drip Tray Assembly, simply slide it toward you, keeping it 

level at all times to avoid spilling. The Drip Tray and Drip Tray Plate 

should not be placed in the dishwasher. They should be cleaned with a 
damp, soapy, non-abrasive cloth and rinsed thoroughly. 

  1.  Cleaning the Parts —

The K-Cup

®

 Pack Holder 

Assembly can be placed onto the top shelf of a 
dishwasher. NOTE: Use low temperature cycles in 

the dishwasher. 

To remove from the Brewer, 

open the cover by lifting the Handle. Grasp the 

top of the K-Cup

®

 Pack Holder with one hand 

while pushing up on the bottom of the K-Cup

®

 

Pack Holder from underneath with the other 
until it releases (fig. 18). After cleaning, align the 
K-Cup

®

 Pack Holder with the opening using the 

two front ribs as a guide, and snap into place 
from the top. 

Set

Hours

Set

Minutes