Bunn Titan Dual Manuel D’Utilisation

Page 7

A. MAIN ON/OFF SWITCH

 

This switch, located under the brewer in front of the right rear leg, turns 

power on and off to all components in the brewer.

B. ON/OFF SWITCH (ENABLE BREW)

 

Pressing the "ON/OFF" button will alternately turn the selected brewing side 

on and off. Pressing this button during the brew cycle will interrupt the brew 

cycle, stopping the flow of water. Pressing this button during programming of 

the brewer will exit the setup and return to the main screen.

C. PROGRAMMING (left)

 

This hidden button can be used to scroll backwards through the function list while in programming mode.

D. BREW

 

When the ON/OFF switch is ON and the main screen is visible, momentarily pressing and releasing this 

button will begin a brew cycle on the selected side.

E. PROGRAMMING (right)

Pressing and holding this button allows entry into the programming menus. Pressing and releasing the but-

ton steps through each function screen while in the programming mode.

F. BATCH SELECTOR SWITCHES

Pressing the button corresponding to the Half or Full batch selects the amount of product to be brewed on 

the selected side. Pressing a different button after a brew cycle has been initiated does not change the brew 

batch in progress. Light indicates the selected batch to brew. Also used in programming to adjust settings on 

both batch sizes.

G. FUNCTION SCREEN

This is the display which shows the various functions of the brewer and allows the programming to be ac-

complished.

H. FUNCTION SCREEN SWITCHES

 

These are hidden switches which are used to program the brewer when in the programming mode.

E

C

D

READY TO BREW

WATER TEMP: 200°

B

G

F

B

D

F

H

P3894

40119 030608