DeLonghi ECAM28.46X Manuel D’Utilisation
10
• release the main switch at the side of the appliance (fig.
2).
Important!
Never press the main switch while the appliance is on.
MENU SETTINGS
When you access the programming menu by pressing the
MENU/ESC button, the following menu items are available:
Rinsing
Use this function to deliver hot water from the spout to heat
the internal circuit and make the coffee delivered hotter.
To enable the function, proceed as follows:
1. Press the MENU/ESC button to enter the menu;
2. Press the HOT MILK or LATTE button (fig. 8) until “Rins-
ing” is displayed;
3. Press the
button. The message “Confirm?” is dis-
played;
4. Press the
(fig. 3): after a few seconds, hot water
flows out of the spout, heating the internal circuit and ma-
king the coffee delivered hotter.
Please note!
Press any button to stop hot water delivery at any time.
Descale
For instructions on descaling, see page 17.
For instructions on descaling, see page 17.
Install filter
For instructions on how to install the filter, see the section
“Installing the filter (page 18).
For instructions on how to install the filter, see the section
“Installing the filter (page 18).
Replacing the filter
For instructions on how to replace the filter, see the section
“Replacing the filter” (page 19).
For instructions on how to replace the filter, see the section
“Replacing the filter” (page 19).
Adjust time
To adjust the time on the display, proceed as follows:
To adjust the time on the display, proceed as follows:
1. Press the MENU/ESC button to enter the menu;
2. Press the HOT MILK or LATTE button (fig. 8) until “Adjust
time” is displayed;
3. Press the
button (fig. 3);
4. Press the HOT MILK or LATTE button (fig. 8) to change
the hours;
5. Press the
button to confirm;
6. Press the HOT MILK or LATTE button (fig. 8) to change
the minutes;
7. Press the
button to confirm.
This sets the time. Press the MENU/ESC button to exit the
menu.
menu.
Auto-start
You can set the auto-start time in order to have the appliance
ready at a certain time (for example in the morning) so you can
make coffee immediately.
You can set the auto-start time in order to have the appliance
ready at a certain time (for example in the morning) so you can
make coffee immediately.
Please note!
To enable this function, the time must already have been set
correctly.
To enable Auto-on, proceed as follows:
1. Press the MENU/ESC button to enter the menu;
2. Press the HOT MILK or LATTE button (fig. 8) until “Au-
correctly.
To enable Auto-on, proceed as follows:
1. Press the MENU/ESC button to enter the menu;
2. Press the HOT MILK or LATTE button (fig. 8) until “Au-
to-start” is displayed;
3. Press the
button. “Enable?” is displayed;
4. Press the
button to confirm;
5. Press the HOT MILK or LATTE button to choose the hours;
6. Press the
6. Press the
button to confirm;
7. Press the HOT MILK or LATTE button (fig. 8) to change
the minutes;
8. Press the
button to confirm;
9. Press the MENU/ESC button to exit the menu.
Once the time has been confirmed, enabling of auto-start is in-
dicated by the
Once the time has been confirmed, enabling of auto-start is in-
dicated by the
symbol displayed alongside the time and
under the Auto-start item in the menu.
To disable the function:
1. Select auto-start from the menu;
2. Press the
To disable the function:
1. Select auto-start from the menu;
2. Press the
button. “Disable?” is displayed;
3. Press the
button to confirm.
The
symbol is no longer displayed.
Auto-Off
The time can be changed so that the appliance switches off
after 15 or 30 minutes, or after 1, 2 or 3 hours.
To re-programme Auto-off, proceed as follows:
1. Press the MENU/ESC button to enter the menu;
2. Press the HOT MILK or LATTE button (fig. 8) until “Au-
The time can be changed so that the appliance switches off
after 15 or 30 minutes, or after 1, 2 or 3 hours.
To re-programme Auto-off, proceed as follows:
1. Press the MENU/ESC button to enter the menu;
2. Press the HOT MILK or LATTE button (fig. 8) until “Au-
to-off” is displayed;
3. Press the
button;
4. Press the HOT MILK or LATTE button (fig. 8) until the de-
sired operation time is displayed (15 or 30 minutes, or 1, 2
or 3 hours);
or 3 hours);
5. Press the
button to confirm;
6. Press the MENU/ESC button to exit the menu.
Auto-off is programmed.
Auto-off is programmed.
Cup warmer
This function enables or disables the cup warmer.
Proceed as follows:
1. Press the MENU/ESC button to enter the menu;
2. Press the HOT MILK or LATTE button (fig. 8) until “Cup
This function enables or disables the cup warmer.
Proceed as follows:
1. Press the MENU/ESC button to enter the menu;
2. Press the HOT MILK or LATTE button (fig. 8) until “Cup
warmer” appears on the display;