Hobart FP400 Manuel D’Utilisation
– 16 –
SYMPTOM
Cutting tool locked to shaft.
Decoring screw or agitator device
cannot be removed.
cannot be removed.
POSSIBLE CAUSE
Build-up between cutting tool and
dicing grid or potato chip grid.
dicing grid or potato chip grid.
Devices have tightened during use
of the machine.
of the machine.
SUGGESTED ACTION
Always use the ejector plate. Use
a thick leather glove and carefully
rotate cutting tool clockwise.
a thick leather glove and carefully
rotate cutting tool clockwise.
Use the wrench provided to
unscrew devices (left-hand thread).
unscrew devices (left-hand thread).
FORM 33966 Rev. A (11-98)
PRINTED IN U.S.A.
TROUBLESHOOTING (Cont'd.)