Hobart ML-18887 Manuel D’Utilisation
– 3 –
PL-56170
LEG (15", 18" or 21")
LEG
LEG END CAP
LEG STUD
NEOPRENE FOOT
FOOT
Fig. 1
Fig. 2
LEGS (Figs. 1, 2)
The four leg assemblies are packed in a separate
carton for shipment. The standard legs (5
carton for shipment. The standard legs (5
3
/
8
" high)
allow the rim of the feed pan on the table model to
be 27" above the table surface. These legs have
neoprene feet and require assembly. To assemble
5
be 27" above the table surface. These legs have
neoprene feet and require assembly. To assemble
5
3
/
8
" high legs: Slide the Leg Stud through the Leg
End Cap and the Leg; then thread the Leg Stud into
the base of the machine (Fig. 2). Do not overtighten;
the legs need only be hand-tight. Thread the
Neoprene Foot into the Leg Stud (Fig. 2).
the base of the machine (Fig. 2). Do not overtighten;
the legs need only be hand-tight. Thread the
Neoprene Foot into the Leg Stud (Fig. 2).
Floor model choppers are equipped with optional
15", 18" or 21" legs. Each Leg is one piece and
threads into the base of the machine at the four
corners. These Legs can be adjusted by threading
the Feet in or out as necessary (Fig. 2) to level and
stabilize the chopper.
15", 18" or 21" legs. Each Leg is one piece and
threads into the base of the machine at the four
corners. These Legs can be adjusted by threading
the Feet in or out as necessary (Fig. 2) to level and
stabilize the chopper.