Epson II+ Manuel D’Utilisation

When you start the System diagnostics, the 

computer 

checks:

l

The setting of the monitor switch (for monochrome or color)

l

The positions of the internal jumpers

l

The peripheral devices that are connected to the system.

After these items are checked, you see a list of the devices available for

testing. This list includes only the devices that are installed in the system.

The list looks something like this:

The following devices have been installed
DEVICE LIST

1 - System board

2 - Memory
3 - Keyboard

5 - Color graphics adapter and CRT

6 - Floppy disk drives and controller

9 - Parallel port (printer interface)

11 - Serial port 

(RS-232C 

port)

14 - Dot-matrix printer

17 - Hard disk 

drives 

and 

controller

Is the DEVICE LIST correct (Y/N)?

If the list correctly describes your system, press Y and then 

If a device

is missing from this list, or if you wish to change the list, press 

and 

confirm the DEVICE LIST, you can only 

test those items.

If you decide later that you need to add another device, you must

return to the main menu and re-select System diagnostics.