Epson II+ Manuel D’Utilisation

4.

5.

Plug the monitor’s power cable first into the power inlet on the monitor

and then into an electrical outlet.

Note: If a monochrome monitor has the proper type of plug, you can

plug it into the auxiliary outlet on the back of the Equity II+

main unit.

Set the monitor switch on the front panel of the main unit for the type of
monitor you are using. (See Figure 1-2.) Slide the switch to the left for a
monochrome monitor or to the right for a color monitor.

Follow these steps to connect the keyboard:

1. Open the cover on the lower left corner on the front panel of the main

unit. Press in to release the cover; then gently pull down the cover.

2. Plug the other end of the cable into the keyboard socket, as shown in Figure

1-6. Do not force the connector, but be sure to insert it all the way

Figure 1-6. Plugging the keyboard cable into the main unit

1-9