Epson II+ Manuel D’Utilisation

After the power-on self test completes successfully, the diagnostics pro-

grams start. Depending on the exact system you purchased, these programs

and certain screen displays may vary. A typical OPERATION MENU looks
like this:

OPERATION MENU

1 - Setup

2 - Format hard disk

3 

- Format diskette

4 - System diagnostics

5

- Prepare hard disk for moving

0 - Exit to DOS for more utilities

Enter selection number:

To select one of the diagnostics programs, press a number from 1 to 5

and press 

Option 3, Format diskette, is included on the OPERATlON MENU for

convenience only. This option lets you format diskettes for use by the System
diagnostics tests without exiting from the diagnostics programs.

To use the other utility programs on the reference diskette, select 0 from

the OPERATION MENU. Then start the utility from the MS-DOS

prompt.

Option 0 exits the diagnostics programs in one of the following ways:

l

If you have not run a diagnostics program, you see this selection on the
OPERATION MENU:

0 - Exit to DOS for more utilities

In this case, when you press 9 and 

you see the MS-DOS prompt.