Crane Merchandising Systems 678 Manuel D’Utilisation
HOT DRINK SETUP/PROGRAMMING GUIDE
6700001
Page - 95
November, 2002
KEYSWITCH
The keyswitch input is active and configured as
an inhibit.
an inhibit.
MACH.TYPE 0
Machine type error displays machine type
screen. NOTE: This is the actual machine type
screen. You may enter the correct machine type
number directly on this screen without further
action.
screen. NOTE: This is the actual machine type
screen. You may enter the correct machine type
number directly on this screen without further
action.
D+J+WXYZ
Configuration error; displays the machine
configuration screen. NOTE: this is the actual
config screen. You may enter the correct config
number directly on this screen without further
action.(Verify cup size and product times in the
configuration screen. NOTE: this is the actual
config screen. You may enter the correct config
number directly on this screen without further
action.(Verify cup size and product times in the
product configuration
screen).
TANK ERR
Tank failed to fill or refill.
RING 1, 2
The cup ring is jammed.
MTR 1A1B2X
Cup turrets are jammed.
NO CUPS 1, 2
Out of cups.
BREW JAM
The brewer is jammed.
WASTE PAIL
The waste pail is full.
LOW WATER
The water level in the tank is low.
COLD WATER
Water in the tank is too cold to vend.
NO SENSOR
Temperature sensor failed or missing.
NO FLOAT
Float sensor failed or missing.
WHIP 1 2 3 4 5
Whipper motor failure (motor 1, 2, 3, 4,
5)
5)
DOOR JAM
The automatic delivery door is jammed.
NO MECH
Coin mech not detected - machine will
not operate if configured for coin mech
not operate if configured for coin mech