Iqua Bluetooth wireless headset BHS-303 black F1333BIUS001 Manuel D’Utilisation

3

Model 

BHS-333

Size 

48 (L) x 9 (W) x 3 (H) mm

Weight 

0g

Talk time 

Up to 6 hours

Standby time 

Up to 50 hours

Charging time 

Within 2 hours

Battery type 

Rechargeable battery with 2.0 mm jack connector

Bluetooth Standard 

Bluetooth 2.0 EDR

Supported Bluetooth profi les 

Handsfree 1.5 and Headset 1.1

Connection 

Point-to-point

Paired devices 

Up to 8, one at a time

Operating distance 

0 meters

Operating temperature range 

0ºC to 50ºC

. Multifunction button 

Handling call functions 

2. Indicator Light 

Status indication with green light

3. Charging connector 

4. Earpiece

5. Microphone
Sales package contents 

a. Headset 

b. Wall charger

c. User guide

d. Two earplugs (one on headset )

e. Earhook (available in selected markets)

Thank you for purchasing Iqua BHS-333 Wireless Bluetooth® Headset. Your new device

is a stylish product that enables you to communicate comfortably with compatible mobile

phones that support Bluetooth wireless technology.
Getting Started
Charging the battery

Before using BHS-333, you must charge it for approximately 2 hours. When the battery

is fully charged, it provides up to 6 hours of talk time and up to 50 hours of standby

time. 

Always use the charger provided in the sales package.

. Connect the charger cable to BHS-333.

2. Plug the charger into a wall socket. The green light will turn on.

3. When the battery is fully charged, the green light will turn off.
Switching on and off
To switch on BHS-333

When the headset is powered off, press the Multifunction -button until you can hear a

sound and the green light fl ashes.
To switch off BHS-333

When the headset is powered on, press and hold the Multifunction -button until you can

hear ascending sound and the green light fl ashes once and turns off.
Pairing the Bluetooth headset to a Bluetooth mobile phone

Pairing is the process for linking BHS-333 with your Bluetooth enabled mobile phone.*

After this process is completed, you can use the BHS-333 with the paired mobile phone.

If you want to use the bhs-333 with another mobile phone, you must repeat the pairing

process. Even though BHS-333 can be paired with up to 8 compatible phones it can only

be connected to one phone at a time. Once it is paired with 8 phones, the 9th paired

device will replace the st paired device.

. When the headset is powered off, press and hold the Multifunction -button until you

    can hear two high sounds and the green light starts fl ashing rapidly.

2. Release the button. BHS-333 is now in pairing mode, waiting for your mobile phone to

    contact it.

3. Complete the pairing with your mobile phone. Please refer your mobile phone manual

    for details on how to search and pair. When phone has found the headset, it will show

    Iqua BHS-333 on its screen. In order to pair with the phone, enter the PIN code 0000.

4. After pairing, BHS-333 will automatically connect to your mobile phone. After pairing,

    some phones do not automatically connect to the headset. If this is the case, please

    ensure that you connect the phone to the headset (please refer to your mobile phone

    manual). Once pairing and connection are completed, the green light fl ashes twice

    every 5 seconds.

If the headset is turned on within 0 meters from several paired phones, the headset will

try to connect to the last connected phone within 0 seconds. If the headset does not

connect to the last connected phone (for example, the paired phone is turned off or it

rejects the connection), the green light will be fl ashing once every 3 seconds indicating it

is powered on but there is no Bluetooth connection.

* For latest compatibility information please visit www.iqua.com
Disconnecting BHS-333 and your phone

Easiest way to disconnect BHS-333 and you phone is simply switch off the BHS-333.
Reconnecting the paired headset to a compatible phone

To reconnect the BHS-333 to the last connected phone, simply switch on the headset

and it will automatically connect to your phone.
Call Functions
Answer a call

When there is an incoming call, you can hear a ringing tone through the headset. Press

the Multifunction -button briefl y to answer the call. You will hear a sound once the call is

answered.
End a call

To end an active call, press shortly the Multifunction -button. You will hear a sound when

the call is ended.
Reject a call

When you receive an incoming call that you do not want to answer, press and hold the

Multifunction -button to reject.
Redial the last dialed number (when supported by the phone)

To place a call to the last dialed number, double press the Multifunction- button when

there is no call in progress. You will hear a high sound when the call is dialed. Please

note some phone models do not support redial.
Voice dialing (when supported by the phone)

To activate the voice dialing feature of your phone, press the Multifunction -button

briefl y when there is no call in progress. You can hear a high sound, which indicates that

you can speak the voice tag. Refer to the mobile phone manual for details. Please note

some phone models do not support voice dialing.

To reset the hardware, plug in the power connector. Please notice that pairing 

information will not be erased.

The BHS-333’s LED light is green and usually accompanied by a sound signal.

Power on but no Bluetooth connection 

Green light fl ashes once every 3 seconds

Bluetooth connection on 

 

Green light fl ashes twice every 5 seconds

Battery low    

 

Green light fl ashes twice every 3 seconds,

 

   

 

and a low sound is played

Battery charging 

 

Green light is on continuously

This product is powered by a built-in rechargeable battery which cannot be changed. Do 

not attempt to replace the battery. Rechargeable battery can be charged and discharged 

hundreds of times, but it will eventually wear out. After a period of time that will vary 

depending on the use and usage conditions, you may fi nd that the built-in battery will 

power your product for only a couple of hours requiring you to charge more frequently.

Do charge your device only with the charger provided in the sales package. Unplug the

charger when not in use. Do not leave the device connected to the charger for longer

period than needed, since overcharging may shorten the battery lifetime.

If left unused a fully charged battery will discharge itself over time.

Temperature extremes may affect the ability of the battery to charge. Always try to keep

the device between 5 °C and 25 °C (59 °F and 77 °F). Leaving the device in hot or cold

places, such as in closed car in summer or winter conditions will reduce the capacity

and lifetime of the battery. A device with hot or cold battery may not work for a while

even when the battery is fully charged. Battery performance is particularly limited in

temperatures well below freezing. Do not charge in humid environment.
Care and Maintenance

 

– Do not expose the device to liquid, moisture or humidity as it is not  

 

 

   waterproof.

 

– Do not use or store the device in dusty, dirty areas. Its moving parts and  

 

   electronic components can be damaged.

 

– Do not store the device in hot areas. High temperatures can shorten the life  

 

   of electronic devices, damage batteries, and warp or melt certain plastics.

 

– Do not store the device in cold areas. When the device returns to its normal  

 

   temperature, moisture can form inside the device and damage electronic  

 

   circuit boards.

 

– Do not drop, knock, or shake the device. Rough handling can break internal  

 

   circuit boards and fi ne mechanics.

 

– Do not use harsh chemicals, cleaning solvents, or strong detergents to    

 

   clean the device.

 

– Use a soft, clean, dry cloth to clean any lenses.

 

– Do not expose your device to contact with sharp objects as this will cause  

 

   scratches and damage.

 

– Do not stick anything inside the device as this may damage internal  

 

 

   components.

 

– Do not dismantle the device or the charger as they do not contain  

 

 

   serviceable parts and taking apart the device may expose you to dangerous   

 

   voltages or other hazards.

Act according to your local rules and do not dispose of this product as part of your 

normal household waste. Follow the applicable separate collection system for electrical 

and electronic products.
How to get service for my IQUA Product?

If you believe that you are entitled to a repair or replacement of your IQUA Product 

based on your statutory rights under the applicable national laws relating to the sale of 

consumer products or warranty given by the retailer, who has sold the IQUA Product to 

you, please contact your retailer.
DECLARATION OF CONFORMITY

We, Iqua Ltd., declare under our sole responsibility, that the product, BHS-333, 

conforms with the provisions of the following Council Directive: 999/5/EC. A copy of 

the Declaration of Conformity can be found at http://www.iqua.com/declaration_of_ 

conformity.

Copyright © 2008 Iqua Ltd