Insys GSM 4.2 I4 11-02-01-03-01.038 Manuel D’Utilisation
![Insys](https://files.manualsbrain.com/attachments/c99a5ca6a2d5e1f8a349c253c85c8050e2b3fb57/common/fit/150/50/e04e755637c125d0009b913065b90f1728ba83de20e00c2edf9cad569234/brand_logo.gif)
Codes de produits
11-02-01-03-01.038
INSYS GSM 4.2 I4
Functions and their configuration
40
Dez-06
Note
If an alarm occurs during periodic logout/login at an external alarm
input, or if a periodic alive SMS is due, the device will immediately
re-login by itself. If the logout time has not expired yet, the device
logs out again afterwards.
If a data connection exists, the device will postpone the logout pro-
cedure. A voice connection and a communication in AT command
mode will interrupt the device immediately when logging out.
If an alarm occurs during periodic logout/login at an external alarm
input, or if a periodic alive SMS is due, the device will immediately
re-login by itself. If the logout time has not expired yet, the device
logs out again afterwards.
If a data connection exists, the device will postpone the logout pro-
cedure. A voice connection and a communication in AT command
mode will interrupt the device immediately when logging out.
Scheduled logout and login
It is useful to log the device out for a short period and log in again every day to allow
maintenance functions of the GSM provider. Enter the logout time and the duration (1 to
98 minutes).
Subsequently, the device logs in into the GSM network again, provided the PIN of the SIM
card is stored.
It is useful to log the device out for a short period and log in again every day to allow
maintenance functions of the GSM provider. Enter the logout time and the duration (1 to
98 minutes).
Subsequently, the device logs in into the GSM network again, provided the PIN of the SIM
card is stored.
Periodical logout/login with reset
In addition, the device can perform a device reset during logout/login using Periodical
logout with reset.
After the device reset, the device logs in into the GSM network again, provided the PIN of
the SIM card is stored.
In addition, the device can perform a device reset during logout/login using Periodical
logout with reset.
After the device reset, the device logs in into the GSM network again, provided the PIN of
the SIM card is stored.
Periodic alive message via SMS
The device can send a periodic alive message to the entered phone number as SMS mes-
sage daily, weekly or monthly. The LED Status is flashing during the dispatch. (see
Chap. 6.2.6 )
The device can send a periodic alive message to the entered phone number as SMS mes-
sage daily, weekly or monthly. The LED Status is flashing during the dispatch. (see
Chap. 6.2.6 )
Power up SMS
If this function is enabled, the device will send an SMS every time the power is inter-
rupted for at least five seconds (not reset) (see Chap. 6.2.6).
The device will add the date and the time to the power up SMS. The date and the time
will have a maximum accuracy of five minutes.
The LED Status is flashing during the dispatch.
If this function is enabled, the device will send an SMS every time the power is inter-
rupted for at least five seconds (not reset) (see Chap. 6.2.6).
The device will add the date and the time to the power up SMS. The date and the time
will have a maximum accuracy of five minutes.
The LED Status is flashing during the dispatch.
Configure system monitoring
1.
1.
Start the program HSComm under Windows.
The configuration software is started and displays the tab "Basic settings".
2.
To enable scheduled login/logout, activate one of the check boxes "Periodical log-
out with reset" or "Periodical logout" in the group "System monitoring" and enter
the requested values in the entry fields "Time" or "Duration".
out with reset" or "Periodical logout" in the group "System monitoring" and enter
the requested values in the entry fields "Time" or "Duration".
Note
Enter the phone numbers in international format, e.g. Germany:
+49...
Enter the phone numbers in international format, e.g. Germany:
+49...
3.
To activate the periodic alive message via SMS, enter the requested values in the
fields "Phone number", "Text" and "Time" in the group "System monitoring".
fields "Phone number", "Text" and "Time" in the group "System monitoring".
4
To enable the power up SMS, activate the check box "Power up SMS" in the group
"System monitoring" and enter the requested values in the fields "Target" and
"Text.
"System monitoring" and enter the requested values in the fields "Target" and
"Text.