Ricoh 8070 Manuel D’Utilisation
Connecting the Machine
18
1
Note
❒ For the Effective Protocol setting, check that the protocol you want to use is
set to [Active].
❒ [IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface
board is installed. If both Ethernet and wireless LAN (IEEE 802.11b) are con-
nected, the selected interface takes precedence.
nected, the selected interface takes precedence.
❒ SMTP Server and Fax E-mail Account must be specified in order to send In-
ternet Fax.
❒ When POP before SMTP is set to [On], you must also make settings for Recep-
tion Protocol and POP3 / IMAP4 Settings.
❒ When SMTP Authentication is set to [On], you must also make settings for
Administrator's E-mail Address.
❒ E-mail Communication Port and Fax E-mail Account must be specified in or-
der to receive Internet Fax.
❒ When setting POP before SMTP to [On], check POP3 port number in E-mail
Communication Port.
Reference
Settings Required to Use E-mail Function
This section lists the settings required for sending e-mail.
Ethernet
This section lists the settings required for sending e-mail with an Ethernet con-
nection.
For details about specifying the settings, see “Interface Settings” and “File
Transfer”.
nection.
For details about specifying the settings, see “Interface Settings” and “File
Transfer”.
Heading
Setting Item
Setting Requirements
Interface Settings/Network Machine IPv4 Address
Necessary
Interface Settings/Network IPv4 Gateway Address
Necessary
Interface Settings/Network DNS Configuration
As required
Interface Settings/Network DDNS Configuration
As required
Interface Settings/Network Domain Name
As required
Interface Settings/Network WINS Configuration
As required
Interface Settings/Network Effective Protocol
Necessary
Interface Settings/Network Ethernet Speed
As required
Interface Settings/Network LAN Type
Necessary