Echo Bear Cat CH9540H (72854) Fascicule

8 & 9"  Pto chipper 

specs

Models CH8540 (71854), CH9540H (72854)

76cm [30"] DIAMETER DISC

1.25" [76cm] diameter by 1.25" [3.2cm] thick rotor disc 

that weighs 275 lbs. [125kg]. Machined to balance. Disc 

turns at 1500 RPM. .75" [4.45cm] diameter rotor shaft.

FOUR CHIPPING BLADES

4 - Reversible Chipper Blades, heat treated chip-

per steal with a chrome content

HYDRAULIC FEED SYSTEM

White 45 cu. in. [737cc]  hyd motor, 10-micron spin on filter. Self-con-

tained system with infinite speed settings, dedicated neutral and full 

reverse, pump output. 25 liters/min [6.6 gal per min.] and 4HP with 

maximum pressure and maximum flow. Feed system operates under 

[1750 PSI  [119atm], 3 gal. [11.4 liter] tank capacity. 

Single 15" [38cm] diameter top feed roller.  Feed rate is 

0 - 150 FPM  [0-45 meters/min.].

FEED SYSTEM

15" diameter

45 degree chipping blade edge angle pulls the logs and limbs. 

Infeed hopper opening is 9"x9" [23cm x 23cm].

Drop-down feed tray with locking safety pin.

EASY ACCESS

The rotor is accessible through the hinged disc cov-

er, which exposes one half of the disc for easy access 

to the chipping blades and for easy clean out.

HEAVY-DUTY CONSTRUCTION

9"x9" [.95cm] thick steel face plate on the disc housing; .25" 

[6.35mm] thick steel on the wrap around with welded construction.

INTEGRATED BLOWER

Put the chips where you want them with the dedicated blower. 360° 

rotatable, 8" [20cm] diameter steel tubing with adjustable spout 

cap allows you to put the chips where you want them the first time.

 

TRIPLE-BANDED BELT DRIVE FOR 

BETTER TRANSFER OF POWER

TELESCOPING TONGUE

Adjustable length and height.  The length may be adjusted 

up to 45 cm [18"] with 4 pin settings on the pintle hitch. 

5cm [2"] coupler hitch available as an accessory.

DIMENSIONS:

Model 71854 – Length 52" • Width  47" • Height 93"

Model 72854 – Length69" • Width  50" • Height 93"

360 DEGREE ROTATIONAL BED

The 360 Degree, 8" discharge chute gives 

accurate control over the flow of chips 

WEIGHTS

Model CH8540 (71854) – 885 lbs

Model CH9540H (72854) – 1300 lbs 

SAFETY

 •  Safety chains standard

 •  Meets all applicable ISO and CE safety standards. 

Find a dealer near you! 

Call us at 800.247.7335 or 

Log onto www.BearCatProducts.com

P.O. Box 849, West Fargo, ND 58078

Email: sales@BearCatProducts.com 

Fax: 701.282.9522