Philips V200 Manuel D’Utilisation

 

Respironics V200 Ventilator Operator’s Manual

REF 1057983 A

The Manual rescale buttons (Figure 13-36) allow you to adjust the vertical 
scale for most waveforms. Press the top half of the scale to change the upper 
limit, and the bottom half of the scale to change the lower limit. A pop-up 
window allows you to adjust the scale. Press the Cancel button to exit the pop-
up window without making changes, or press Accept to select the new value 
and exit the pop-up window. 

The Cursor arrow buttons (Figure 13-36) allow you to adjust the position of the 
cursor for all three waveforms. You can also turn the knob to adjust the cursor 
position.

The data display window for each waveform shows the value of the data at the 
time indicated by the cursor position. A window at the bottom of the screen 
shows the time reflective of the cursor position. 

Alarms are represented as active or inactive. To see which alarm was active at 
a given time, move the cursor to that time. Up to three alarms that were active 
appear in the data display window. They appear in order of priority.

Maneuvers display the value obtained when the maneuver was performed. No 
data is displayed for times when the maneuver was not performed.

Manual

rescale

button

Pop-up 
window for 
adjusting 
scale