Philips V200 Manuel D’Utilisation

REF 1057983 A

Respironics V200 Ventilator Operator’s Manual

1. Locate the gas outlet port (1) on the front panel. 

2. If the optional O

2

 sensor (2) will be used, connect it to the gas outlet 

port (1).

3. Remove the inspiratory bacteria filter from the filter package and 

inspect for cracks or potential leaks. Discard the filter if it is cracked, 
has moisture inside, or is otherwise unserviceable.

4. Some bacteria filters provide an arrow or other mark to indicate the 

direction of flow. The flow indicator should be pointed away from the 
ventilator, toward the patient circuit connection
Insert inspiratory filter inlet (4) into either
•

the optional O

2

 sensor (2) using the 22mm connector (3)

or

•

the gas outlet port (1) if the optional O

2

 sensor (2) is not used.

5. Connect inspiratory limb of patient circuit (5) to bacteria filter (4).

NOTE:

NOTE: