Emerson I-0021 Manuel D’Utilisation

90003482(2) [NGA-e (MLT-Software 3.2.X)] 07/98

NGA 2000

↓↓

Analyzer module setup

↓↓

Peak measurement

↓↓

In the menu "Concentration Peak Measurement" you can determine the conditions for the
extreme values of a channel. If you want to change to the other channels of an MLT
analyzer or analyzer module, you have to press the F3 key.

Set up parameters:

♦ 

Select any line of variables or any function line with the 

↓↓

 -key or the 

↑↑

 -key.

♦ 

Select the variable or start the function with the 

88 

 -key or the 

→

→

 -key.

♦ 

If asked after function start: Confirm with the F2 key (Yes) or
cancel and go back to the menu page with the F4 key (Back...) or the 

←

←

 -key.

♦ 

Variable changing: Select the parameter with the 

↑↑

 -key or the 

↓↓

 -key.

♦ 

Confirm the new parameter with the 

88 

 -key or

cancel and go back to the last adjustment with the F2 key.

Function lines "Reset minimum !" or "Reset maximum !"

Starting these functions will reset the last minimum or maximum value of concentration.
This is necessary to start a new minimum or maximum determination.

Function line "Reset both !"

Starting this function will reset the last minimum and the last maximum value of con-
centration simultaneously.

Measure

Channel

Back...

TAG

95.00 ppm

-- Concentration Peak Measurement --

Reset minimum !

Reset both !
Minimum detection:

Always

Maximum detection:

Always

Last minimum:

93.400

Last maximum:

95.900

Reset maximum !

Difference (Max-Min):

2.500

[2nd menu page via F5 (More...)]