Emerson I-0021 Manuel D’Utilisation

90003482(2) [NGA-e (MLT-Software 3.2.X)] 07/98

NGA 2000

Press the 

88 

 -key or the 

→

→

 -key in the line "Analog output setup..." to change to the

corresponding submenu:

Configuration of the analog output:
1) Select the analog output number:

• 

You can set up all parameters in the menu "Analog Outputs" separately for each of
the available analog outputs. The number of outputs depends on the hardware
configuration of the local SIO module (minimum: 2, maximum: 8).

• 

Press the 

88 

 -key or the 

→

→

 -key to select the output number and adjust the value you

want with the 

↑↑

 -key or the 

↓↓

 -key.

• 

Confirm the number selected with the 

88 

 -key.

• 

Change with the 

↓↓

 -key to the line "Choose signal source module..."

• 

Change to the submenu "Analyzer Modules" with the 

88 

 -key or the 

→

→

 -key.

The tags of all analyzer modules combined with the platform or the MLT analyzer will
appear:

Measure

More...

Back...

TAG

95.00 ppm

-- Analog Outputs --

Output number:

1

Choose signal...
Signal value for 0% output:

0.00 ppm

Signal value for 100% output:

2500.00 ppm

Output current range:

0...20 mA

Hold output during calibration?

No

Current signal value:

95.00

Source module:

TAG

Choose signal source module...

Signal name:

Concentration

Measure

Back...

MLT25/CH2/R2

95.00 ppm

-- Analyzer Modules --

MLT25/CH1

MLT25/CH2
MLT25/CH3
MLT25/CH4
MLT25/CH5