Emerson I-0021 Manuel D’Utilisation
5 - 94
NGA 2000
90003482(2) [NGA-e (MLT-Software 3.2.X)] 07/98
The last five lines of variables in the menu "DIO-Module Outputs" only display some
adjustments of the DIO output selected! They are not available:
adjustments of the DIO output selected! They are not available:
♦
"Module status:" displays the status of the current DIO board.
♦
"Slot ID:" displays the tag number of the DIO board selected.
♦
"Signal name:" displays the signal selected for the current DIO output.
♦
"Signal level:" displays the status of the signal selected.
♦
"Signal comes from:" displays the source module selected for the current DIO output.
Configuration of the DIO module inputs:
Press the
88
-key or the
→
→
-key in the line "Inputs..." to change to the corresponding
submenu:
In the menu "DIO-Module Inputs" you have to determine the configuration for all of the
eight DIO module inputs!
eight DIO module inputs!
DIO input configuration setup:
1) Select the input number:
•
Press the
88
-key or the
→
→
-key in the line "Inputnumber" and adjust an input number
(1, ... , 8) with the
↑↑
-key or the
↓↓
-key.
•
Confirm the number selected with the
88
-key.
2) Choose the module:
•
Change with the
↓↓
-key to the line "Choose module...".
•
Change to the submenu "Analyzer Modules" with the
88
-key or the
→
→
-key.
(illustration see next page)
All modules joint to the platform or to the MLT analyzer and the control module will be
available.
All modules joint to the platform or to the MLT analyzer and the control module will be
available.
•
Go to the line you want with the
↑↑
-key or the
↓↓
-key. If there are more than eight
source modules available, you have to press the F5 key to go to another menu page.
Measure
Next
Back...
TAG
F1
F2
F3
F4
F5
95.00 ppm
-- DIO-Module Inputs --
Choose module...
Choose function...
Choose function...
Slot ID:
1
Signal level:
Off
Signal comes from:
????
Inputnumber:
1
Signal name:
????