Emerson I-0021 Manuel D’Utilisation

NGA 2000

90003482(2) [NGA-e (MLT-Software 3.2.X)] 07/98

Before using the system calibration we have to put together the required valve pool. There
are in principle three types of I/O modules supporting this:

• 

DIO 

- 24 digital outputs / 8 digital inputs (max. 4 DIO modules per platform or 2 per

 

         MLT/TFID analyzer)

• 

SIO 

- 3 digital outputs (max. 1 SIO module per CM)

• 

[CVU - 

- 4 digital outputs (max. 4 modules per CM)]

Software supports up to 32 system valves. SIO and DIO are available, the control valve unit
(CVU) is in progress.

Assigning of an output can be accomplished by using the menus for selected output module
(DIO, SIO or CVU).
There we have to select the NGA Control Module as  the Source Module. Control module
then provides the signals for system valve V1...V32.

For example the DIO:

There we have to

• 

select "Outputnumber"

• 

then choose „NGA Control Module“ as module

• 

Analyzer and I/O-module expert configuration...

↓

↓

DIO module(s)...