Sun Microsystems 817-3630-11 Manuel D’Utilisation
76
SunPCi III 3.2.1User’s Guide • March 2004
2. From the Start menu, choose Programs, and then choose Windows Explorer.
The Windows Explorer window opens.
3. In Windows Explorer, navigate to the following path:
Note –
If you cannot find this directory on your C: drive, either you have installed
the wrong version of the SunPCi III software, or you did not update your drivers.
4. Double-click
upgrade.bat.
The upgrade process continues. This program automatically maps a network drive
for its own use. If you do not have a network drive letter available in Windows
Explorer, the process fails.
for its own use. If you do not have a network drive letter available in Windows
Explorer, the process fails.
5. Follow the prompts on the window and enter the information that Microsoft
Windows requests.
For example, enter the CD key on the back of your CD case and your administrator’s
password when prompted.
password when prompted.
When you are finished entering all the information, the SunPCi III software reboots
again into Windows Server 2003.
again into Windows Server 2003.
Tip –
This step can take several minutes to complete.
Upgrading Windows NT4 Server or Windows
NT4 TS to Windows Server 2003
NT4 TS to Windows Server 2003
Caution –
The setup and configuration procedures for the SunPCi III software
involve some steps that differ from the Microsoft upgrade steps. Do not use the
standard Microsoft upgrade procedure provided on the Windows Server 2003 CD or
the installation will fail and your emulated C: drive can become corrupted.
standard Microsoft upgrade procedure provided on the Windows Server 2003 CD or
the installation will fail and your emulated C: drive can become corrupted.
C:\sun\wnetupg\upgrade.bat