Sun Microsystems 817-3630-11 Manuel D’Utilisation

Chapter 5

Using Windows XP Professional

13. Click OK to close the System Properties dialog box.

To enable the physical adapter to use TCP/IP in the network, you need to complete
the procedure “How to Configure the Network for Windows XP Professional” on
page 49.

▼

How to Prepare Windows XP Professional to
Display External Video

To use an external monitor, you need to attach the monitor to the SunPCi III main
card backplate and install the external video driver. The video drivers are now
automatically installed during the SunPCi III installation.

Caution –

Do not use both system and external monitors at the same time. SunPCi

software does not support multi-headed operation.

1. Attach the monitor to the external video port connector on the SunPCi III main

card backplate.

Refer to

FIGURE 10-1

to find the location of the external video port.

2. Exit Windows XP and the SunPCi III software.

3. At the Solaris system prompt, restart the SunPCi III software using the

-v

option:

Note –

If you do not use the

-v

option, the Sun display will appear scrambled.

The SunPCi III software starts, and Windows XP Professional opens first on the
external monitor, and then on your system monitor in the SunPCi III window.

4. Attach the mouse by pressing Meta-M.

You are now ready to configure the Windows XP Professional display as described in
the following procedure.

% /opt/SUNWspci3/bin/sunpci -v