Dixon 539 131301 Manuel D’Utilisation
9
ASSEMBLY
3
CONTAINER MOUNTING
1. Install container, centering between support
tubes.
NOTE: One container should always
overlap the other container at supports.
overlap the other container at supports.
2. Close cover and lock latch handles over
center support tubes.
WARNING
DO NOT operate mower unless container is
properly installed. Container is subject to
wear and deterioration, check containers
frequently, replace when cracked or dam-
aged. Use only a recommended replace-
ment container.
properly installed. Container is subject to
wear and deterioration, check containers
frequently, replace when cracked or dam-
aged. Use only a recommended replace-
ment container.
Cover Latch
Handle
Handle
Support
Tubes
Tubes
4
UPPER CHUTE
1. Attached flex tube to blower and secure with
the hose clamp.
2. Slide opposite flex hose end into upper chute.
3. Push upper chute through the gasketed
opening in the cover assembly.
4. Rotate flex tube and upper chute so that the
chute opening is downwards toward the
container bags.
container bags.
Cover Gasket
Rotate Upper Chute
to point downwards
towards bags
to point downwards
towards bags
Container Bags