Soyo SY-P4I875P Manuel D’Utilisation
BIOS Setup Utility
SY-P4I875P DRAGON 2 V1.0
55
3-1.3 OnChip IDE Device
Caution: Change these settings only if you are already familiar
with the IDE settings.
with the IDE settings.
The [OnChip IDE Device] option changes the settings of the 82801ER
(ICH5R) IDE controller. These settings do not influence the ALi M5281
controllers.
(ICH5R) IDE controller. These settings do not influence the ALi M5281
controllers.
The following screen shows setup default settings.
Phoenix – Award BIOS CMOS Setup Utility
OnChip IDE Device
IDE 1,2 /SATA 1,2
IDE only
IDE HDD Block Mode
Enabled
Item Help
IDE DMA transfer access
Enabled
On-Chip Primary PCI IDE
Enabled
IDE Primary Master PIO
Auto
IDE Primary Slave PIO
Auto
IDE Primary Master UDMA
Auto
IDE Primary Slave UDMA
Auto
On-Chip Secondary PCI IDE
Enabled
IDE Secondary Master PIO
Auto
IDE Secondary Slave PIO
Auto
IDE Secondary Master UDMA
Auto
IDE Secondary Slave UDMA
Auto
*** On-Chip Serial ATA Setting ***
SATA Mode
IDE
On-Chip Serial ATA
Disabled
x Serial ATA Port0 Mode
Primary Master
x Serial ATA Port1 Mode
Primary Slave
Menu Level
[Disabled]: Disabled SATA
Controller.
[Auto]: Auto arrange by
BIOS.
[Combined Mode]: PATA
and SATA are combined.
Max. of 2 IDE drives in each
channel.
[Enhanced Mode]: Enable
both SATA and PATA. Max.
of 6 IDE drives are
supported.
[SATA Only]: SATA is
operating in legacy mode.
[Disabled]: Disabled SATA
Controller.
[Auto]: Auto arrange by
BIOS.
[Combined Mode]: PATA
and SATA are combined.
Max. of 2 IDE drives in each
channel.
[Enhanced Mode]: Enable
both SATA and PATA. Max.
of 6 IDE drives are
supported.
[SATA Only]: SATA is
operating in legacy mode.
ÇÈÆ
:Move
Enter:Select
+/-/PU/PD:Value
F10:Save
ESC:Exit
F1:General Help
F5:Previous Values
F6:Fail-Safe Defaults
F7: Optimized Defaults
After you have completed the changes, press [Esc] and follow the instructions
on your screen to save your settings or exit without saving.
on your screen to save your settings or exit without saving.