GE ZCGP150 Manuel D’Utilisation

11

Compactor is unplugged

Make sure the cord is plugged securely into 
a working outlet.

Circuit breaker/fuse is

Check house circuit breakers /fuses. 

tripped/blown

Replace fuses or reset breaker. 

Knob switch may not be

Make sure the switch is in the ON position.

in the ON position

Foot pedal may not have been lifted up 
long enough to start the compaction cycle. 

Drawer may not be closed

Check to make sure the drawer is firmly 
closed.

Compactor has an automatic

If you have just compacted repeatedly,  

thermal motor reset

this protector may have opened the motor 
circuit. Wait a few minutes and the motor 
reset will reclose automatically.

Trash may have fallen

Remove any trash. 

behind the drawer

The ram is not all the

Lift up on the foot pedal and release to 

way up

allow ram to complete a cycle.

Drawer is not full

The drawer must be at least 1/2 full of  

enough

trash before you will see any amount of 
compacting. The ram does not travel all the
way to the bottom. Trash in the bottom of 
the drawer will be crushed during later 
cycles.

Trash is stuck between ram 

Remove any trash.

and basket

Before You Call For Service