AEG PV.500-MH Manuel D’Utilisation

Page de 68
Protect PV.500-MH Operating Instructions 
62 of 68 
80000043212 BAL 
 
At the top, a sun symbol indicates the current solar radiation trend. 
If the sun is black or a moon symbol is displayed, the PV voltage is 
so low that the inverter is in its idle state. An empty sun with no 
rays also indicates that the PV voltage is still too low, with the in-
verter in standby mode. 
The inverter is represented in the middle of the left-hand section. If 
a fault occurs or a message is present, the corresponding symbols 
flash on the inverter. The bar on the left shows the PV voltage as a 
symbol and a digital value. If the bar is completely filled in, this in-
dicates that sufficient PV voltage is present. The bar on the right 
shows the inverter status. If the inverter is feeding power into the 
mains, the bar is filled in.  
The total energy fed in is shown at the bottom of the display. 
 
Examples of possible displays: 
 
Figure 29 
Example of operating display   
The equipment is in its normal state, the inverter is feeding power 
into the mains. 
 
Figure 30 
Example of operating display   
Solar radiation is sufficient, the inverter is switched off. If the sine 
symbol on the inverter is flashing, the inverter has been switched 
off due to a fault or it is currently in the synchronisation phase.