GE GCG1500 Manuel D’Utilisation
8
Operating Instructions
Safety Instructions
Care and Cleaning
Tr
oubleshooting T
ips
Consumer Support
Before you call for service…
Troubleshooting Tips
Problem
Possible Causes
What To Do
Compactor won’t operate
Compactor is unplugged
•
Make sure the cord is plugged securely into a
working outlet.
working outlet.
Circuit breaker/fuse is
•
Check house circuit breakers /fuses. Replace
tripped/blown
fuses or reset breaker.
Knob switch may not be
•
Make sure the switch is in the ON position.
in the ON position
•
Foot pedal may not have been lifted up long enough to
start the compaction cycle.
start the compaction cycle.
Drawer may not be closed
•
Check to make sure the drawer is firmly closed.
Compactor has an automatic
•
If you have just compacted repeatedly, this protector
thermal motor reset
may have opened the motor circuit. Wait a few
minutes and the motor reset will reclose
automatically.
minutes and the motor reset will reclose
automatically.
Drawer is hard
Trash may have fallen
•
Remove any trash.
to close
behind the drawer
Drawer will not
The ram is not all the
•
Lift up on the foot pedal and release to allow ram to
open
way up
complete a cycle.
Little or no apparent
Drawer is not full
•
The drawer must be at least 1/2 full of trash before
compaction
enough
you will see any amount of compacting. The ram does
not travel all the way to the bottom. Trash in the bottom
of the drawer will be crushed during later cycles.
not travel all the way to the bottom. Trash in the bottom
of the drawer will be crushed during later cycles.
Trash is stuck between ram
•
Remove any trash.
and basket