GE GCG1500 BB Manuel D’Utilisation

• The top of the compactor should be at least 1/8

″ 

(3 mm) from the top of the cabinet opening. You can
adjust the height of the compactor by turning the
screws on the front leveling legs and rear wheels.

• Place a level inside the compactor on the floor 

of the cabinet.

• Use the leveling legs to adjust level front to back and

side to side.

Front leveling legs

Rear wheels

• Determine installation depth of the compactor

beneath the countertop.

• Adjust the position of the retaining brackets so that

the screws can meet the underside of the
countertop. 

• Mounting clips are provided for stone or other hard

countertops that will not accept screws.

Retaining
bracket

Countertop

A toekick extension is supplied. It can be used to cover
any gaps from the bottom of the compactor to the floor.

• Remove the top toekick screws as shown. Lift off top

toekick piece.

• Loosen the base toekick screws, adjust to touch the

floor and tighten the screws.

• Reinstall the top toekick piece with the original

screws.

Loosen screw
on each side

Top toekick

Adjustable
lower toekick