Seagate ST400FM0013 Manuel D’Utilisation

Seagate 1200 SSD Product Manual, Rev. C

  57

  

This section partially describes the interface requirements as implemented on Seagate 1200 SSD drives. Additional 
information is provided in the SAS Interface Manual (part number 100293071).

This section lists the SAS-specific features supported by Seagate 1200 SSD drives.

Table 13 lists the SAS task management functions supported.

Table 14 lists the SAS response codes returned for task management functions supported.

Seagate 1200 SSD SAS drives have two independent ports. These ports may be connected in the same or different SCSI 
domains. Each drive port has a unique SAS address.

The two ports have the capability of independent port clocking (e.g. both ports can run at 12Gb/s or the first port can run at 
12Gb/s while the second port runs at 6Gb/s.) The supported link rates are 1.5, 3.0, 6.0 or 12.0 Gb/s.

Subject to buffer availability, the Seagate 1200 SSD drives support:
• Concurrent port transfers—The drive supports receiving COMMAND, TASK management transfers on both ports at the 

same time.

• Full duplex—The drive supports sending XFER_RDY, DATA and RESPONSE transfers while receiving frames on both 

ports.

Abort Task

Yes

Abort task set

Yes

Clear ACA

Yes

Clear task set

Yes

I_T Nexus Reset

Yes

Logical Unit Reset

Yes

Query Task

Yes

Query Task Set

Yes

Query Asynchronous Event

Yes

Function complete

00

Invalid frame

02

Function not supported

04

Function failed

05

Function succeeded

08

Invalid logical unit

09