Samsung RSH3F Manuel D’Utilisation

01 
s

E

tting

 u

P

setting up your side-by-side 

refrigerator

Remove any residual matter inside the purifier. (Model with the purifier)

-   Open the main water tap to check whether water 

is running through the water tube on the water inlet 
side of the purifier.

-   If water does not come out through the line, check 

whether the tap is open.

-   Leave the tap open until clean water is running 

out and any residual matter that built up during 
manufacturing has been removed.

setting up

 

WATER LINE

PURIFIER

WATER

OUTLET SIDE

OF PURIFIER

Secure the water line.

-   Using clip ”A”, fix the water line to the wall (the back of refrigerator).
-    When the water line is secure, make sure whether the water line is not 

excessively bent, pinched or squashed.

CLIP A

WATER LINE

Connect the water line to the refrigerator.

-  Remove the compressor cover of the refrigerator.
-  Connect the water line to the valve, as shown in the figure.
-  When connected, check if there is any leakage.
    If any, repeat the connection.
-  Reattach the compressor cover of the refrigerator.

WATER LINE

INSTRUCTIONS

COMPRESSOR COVER OF

REFRIGERATOR

CONNECTION NUT

Attach the purifier lock-clip.

-  Hold the purifier lock-clip in the appropriate position
   (under the sink for example) and fix it tightly into place
   where to screw.

PURIFIER LOCK-CLIP

Secure the purifier in position.

-   Fix the purifier in position, as shown in the figure on the right.

WATER TUBE

PURIFIER LOCK-CLIP

PURIFIER

DA99-01584A(HM-P)-EN(0.1).indd   21

2007.10.4   5:20:43 PM