Samsung RSG5 Manuel D’Utilisation

setting up

 

Sticker

(month indicator)

01 
s

E

tting

 u

P

setting up your side-by-side 

refrigerator

instaLLing thE watEr DisPEnsEr LinE

Connecting the water line to the refrigerator

1.    Remove the cap from water line on the unit and insert compression nut to the water line on 

the unit after disassembling from provided water line.

2. Connect both water line from the unit and water line in the kit
3.  Tighten the compression nut onto the compression fitting. Be careful no gap between two items.
4. Turn water on and check for any leakage.

Only connect the water line to a drinkable water source. 
If you have to repair or disassemble the water line, cut off 6.5mm of the plastic tubing to 
make sure you get a snug, leak-free connection.

Before being used, the leakage in these places should be examined

• Samsung Warranty does not cover  WATER LINE INSTALLATION.
• It’ll be done at customer’s 

charge unless the retail price 
includes installation cost.

• Please contact Plumber or 

Authorized Installer for the 
installation if needed.

• If Water leakage occurs due to 

improper installation, Please contact installer.

Installing the water filter.

Before installing the water filter, please 
remove the top shelf.

1. Remove the water filter cover(

) 

2.  Remove the fixed cap by turning it counter 

clockwise. Keep the cap in a safe place for later 
use if you don’t use a filter.

3.  Remove the water filter from the box and put 

a replacement indicator sticker on the filter as 
shown.  Place a sticker on the filter that dates 
six months in the future. For example, if you 
install the water filter  in March, put the “SEP” 
sticker on the filter to remind you to replace in 
September. That way you’ll know when it is 
time to replace the filter. Normally, a filter life is 
about 6 months.

DA99-01745A(EN)-GGH-0.3.indd   17

2008.8.20   8:42:3 PM