Samsung RF265AB Manuel D’Utilisation

 

Setting Up

4.  Remove the filter cap and insert the filter into the filter 

housing.

5.  Slowly turn the water filter 90º clockwise to align with the 

printing mark on the cover, locking the filter in position. 

Make sure to align the water filter label mark with center of 

cover filter printing as illustrated. Remember, do not over-

tighten.

You should remove the right side upper glass shelf before installing water filters.

Removing any residual matter inside the water 
supply line after installing the water filter.

1.  Turn ON the main water supply & turn OFF the valve to 

the water supply line.

2.  Run water through the dispenser until the water runs clear 

(approx. 6-7 minutes). This will clean the water supply 

system and remove air from the lines.

3.  Additional flushing may be required in some households. 
4.  Open the Refrigerator door and make sure there are no 

water leaks coming from the water filter.

Be sure to flush the dispenser thoroughly or water may drip from the dispenser. 

This is due to the fact that there is still air in the line.

Setting up your French Door Refrigerator

Turn until the label 

aligned.

Separation

of red cap.

Cover filter.

test button

test button

In case ice doesn’t come out, pull out the ice bucket and press test button located on the right side of ice 
maker.

CAution