Samsung RF31FMESBSR Manuel Du Propriétaire
22_
operating
( 9 )
Ice Off
If you don’t want to make more ice, touch
the Ice Off button.
The icon will light up and the Ice-Maker
stops making ice.
the Ice Off button.
The icon will light up and the Ice-Maker
stops making ice.
We recommend you stop ice
making if the following occur:
making if the following occur:
- There is enough ice in the ice
bucket.
- You want to save water and
energy.
- Water is not being supplied to
the refrigerator.
If the ice maker function is ON, and
the water line is not connected,
there will be a water valve noise
from the back of the unit. If this
occurs, press the Ice Off (Hold
3sec for child lock) button for less
than 3 seconds until the Ice Off
Indicator ( ) illuminates.
the water line is not connected,
there will be a water valve noise
from the back of the unit. If this
occurs, press the Ice Off (Hold
3sec for child lock) button for less
than 3 seconds until the Ice Off
Indicator ( ) illuminates.
To save electricity, the Panel Display turns off
automatically under the following conditions:
When no button has been pressed, when
no doors are open, or when no Dispenser
Lever has been pushed. However, the icon
indicating your cubed or crushed ice selection,
or sparkling water selection, will stay on.
When you press a button, open a door, or
push a Dispenser Lever, the Panel Display will
turn on again. All function keys will become
operational after you remove your fi nger from
the button you pressed.
automatically under the following conditions:
When no button has been pressed, when
no doors are open, or when no Dispenser
Lever has been pushed. However, the icon
indicating your cubed or crushed ice selection,
or sparkling water selection, will stay on.
When you press a button, open a door, or
push a Dispenser Lever, the Panel Display will
turn on again. All function keys will become
operational after you remove your fi nger from
the button you pressed.
( 10 )
Filter
Water filter usage
This icon lights up when you need
to change the filter, usually after the
refrigerator has dispensed about 300
gallons of water (after about 6 months).
After you install the new water filter, reset
the filter indicator by touching and holding
the Hold 3sec for Filter Reset button for
3 seconds.
This icon lights up when you need
to change the filter, usually after the
refrigerator has dispensed about 300
gallons of water (after about 6 months).
After you install the new water filter, reset
the filter indicator by touching and holding
the Hold 3sec for Filter Reset button for
3 seconds.
- If water is not dispensing or
dispensing slowly, you need to
replace the water filter because
the water filter is clogged.
replace the water filter because
the water filter is clogged.
- Some areas have large amounts
of lime in their water, which
causes the water filter to clog
more quickly.
causes the water filter to clog
more quickly.
( 11 )
Cubed
Ice/
Crushed
Ice
Press the Cubed/Crushed button to select
the type of ice you want dispensed.
Each time you press the button, the
cubed and crushed ice modes alternate
and the Cubed or Crushed ice icon lights
up, indicating your selection.
the type of ice you want dispensed.
Each time you press the button, the
cubed and crushed ice modes alternate
and the Cubed or Crushed ice icon lights
up, indicating your selection.
(Cubed)
(Crushed)
( 12 )
Sparkling
Icon
When you press the Sparkling button
(Button 8), the Sparkling Water Icon goes
on.
(Button 8), the Sparkling Water Icon goes
on.
DA68-02894A-09.indb 22
DA68-02894A-09.indb 22
2013. 12. 3.
8:45
2013. 12. 3.
8:45