Samsung RF4287HARS Manuel D’Utilisation
setting up
_21
01
SE
tting u
tting u
P
Setting up your French Door Refrigerator
inStALLing tHE wAtER LinE
Connecting the water supply line to the refrigerator.
There are several items that you need to purchase to complete this connection.
You may find these items sold as a kit at your local hardware store.
You may find these items sold as a kit at your local hardware store.
1. Slip the compression nut ( A ) through the supplied plastic tubing ( A ).
2. Tighten the compression nut ( A ) onto the 1/4” compression fitting.
- If you are using copper tubing, slip the compression nut ( b ) (not supplied) and ferrule (not supplied)
on copper tubing (not supplied) as shown.
- If you are using plastic tubing ( b ) , insert the molded end (Bulb) of the plastic tubing ( b ) into the
compression fitting.
Do not use without the molded end(Bulb) of the plastic tubing (
b ).
3. Tighten the compression nut ( b ) onto the compression fitting.
Do not over-tighten the compression nut (
b ) .
4. Turn water on and check for any leakage. If you find water drops or leakage in the connection areas, turn
off the main water supply. Check the connections and, if nescessary, tighten.
5. Flush 1 gallon of water through the filter before drinking or using the water from the refrigerator. (Flush
approximately 6 minutes.) To flush, press a large glass or cup against the water dispenser lever. Fill the
glass, empty it into the kitchen sink after it is filled, and then repeat.
glass, empty it into the kitchen sink after it is filled, and then repeat.
6. After you turn on the refrigerator, let the ice maker make ice for 1 to 2 days. Over that period of time,
throw out the first 1 or 2 buckets of ice the freezer makes to ensure all impurities have been removed
from the water line.
from the water line.
Only connect the water line to a drinkable water source.
If you have to repair or disassemble the water line, cut off 1/4“ of the plastic tubing to make sure you
get a snug, leak-free connection.
If you have to repair or disassemble the water line, cut off 1/4“ of the plastic tubing to make sure you
get a snug, leak-free connection.
Plastic tubing
(A) (Supplied)
Ferrule (not
supplied)
compression
nut (A) (1/4”)
(Supplied)
nut (A) (1/4”)
(Supplied)
compression
fitting (Supplied)
fitting (Supplied)
Molded
end(Bulb)
end(Bulb)
compression nut
(B) (1/4”) (not
supplied)
(B) (1/4”) (not
supplied)
or
copper tubing
(not supplied)
Plastic tubing (B)
(not supplied)
(not supplied)
Household water supply line
Refrigerator
use copper tubing
use Plastic tubing
• ¼” copper tubing
• ¼” compression nut (2pc)
• Ferrule (2pc)
• ¼” plastic tubing
→
Molded end(Bulb)
• ¼” compression nut (2pc)
cAution
DA68-01922B.indb 21
2010.4.24 10:53:15 AM