Samsung RS2630A** Manuel D’Utilisation

23

Making small level adjustments between doors.

If the freezer door is higher than the refrigerator door.

3) After adjusting the doors, turn the nut (

①) clockwise(            ) until the lower end of the bolt,  then tighten the

bolt again with the wrench (

➂) to fix the nut(①).

If you do not fix the nut (

①)firmly, the bolt (➁) may be released.

2) Please adjust the height difference between the doors turning the bolt (

➁) clockwise(          ) or counter clockwise

(          ).

When you turn clockwise (

),  the door goes up.

Adjustment location

➂ WRENCH

➀ NUT

➁ BOLT

➀ NUT

➁ BOLT

➂ WRENCH

➂ WRENCH

➁ BOLT

Please open the doors and adjust the doors as follows:

1) Release the nut (

①) on the lower hinge  until the upper end of the bolt (➁).

When you release the nut(

①), use enclosed hex wrench (➂) to turn the bolt(➁) a little counter-

clockwise. Loosen the nut(

①) with your finger.

➀ NUT

DA68-01592A-0.1  8/13/06 7:06 AM  Page 23