Samsung RS2622 Manuel D’Utilisation

19

M

Meecchhaanniiccaall DDiissaasssseem

mbbllyy

The ice maker is located inside of the ice dispenser

assembly.

1. Remove ice maker support screws (2), and slide out.
2. Disconnect the ice maker wire connector.
3. Unlock the locking tabs to separate the ice maker kit.

In order to assemble the icemaker kit.
1. Assemble the geared motor shaft and the front of 

ice tray.

2. Lift the front locking tab and assemble the ice 

maker kit.

3. Connect the ice maker wire connector.
4. Match the tab holes and tabs(2) located on the 

top of the liner, and slide the ice maker in.

5. Tighten the screws (2) of the ice maker support.

This shelf is designed to support the ice maker 

＆

ice dispensed and Xtra Space

TM

.

1. Remove the Xtra Space

TM

cover to push it down 

near the partition.

2. Slide the partition out.
3. Remove the screws (2) on the bottom front of the 

case.

4. Slide out the case while disconnecting the wire 

connect.

Partition

Screws