Samsung RFG298AARS Manuel D’Utilisation

 

Operating

Operating your French Door 

Refrigerator

using the ice Dispenser

Place a glass underneath the ice dispenser and push gently against the dispenser 

lever with your glass.

Make sure the glass is in line with the dispenser to prevent the ice from bouncing out. 

CAution

•    When Cubed Ice is selected after using the Crushed Ice mode, a small 

amount of residual crushed ice might be produced.

PUSH

Controlling the fridge temperature

The fridge temperature can be set between 46°F and 34°F to suit your particular needs. Press the Fridge 

button repeatedly until the desired temperature is shown in the temperature display. The temperature will 

move 2°F degrees each push(38°F → 36°F → 34°F → 46°F → 44°F → 42°F → 40°F → 38°F). The temperature 

control process for the Fridge works just like the Freezer process. Press the Fridge button to set your desired 

temperature. After a few seconds, the Fridge will begin adjusting towards the newly set temperature. This will be 

reflected in the digital display.

-   The temperature of the Freezer, fridge or Pantry Room may rise 

   when you open the doors too frequently, or if a large amount of 

   warm or hot food is placed inside.

-   This may cause the digital display to blink. Once the Freezer and 

   fridge temperature return to their normal set temperatures, the 

   blinking will stop.

-   If the blinking continues, you may need to “reset” the Refrigerator. 

   Try unplugging the appliance, wait for around 10 minutes and then 

   plug the power cord back in.

-  The temperature of the Pantry Room may be a little different according to the location inside.

-   If communication between Display and Main Controller errors, Pantry Display light may blink.

   Once the communication return to their normal set temperatures, the blinking will stop.

   If the blinking continues for a long period of time, please contact to Samsung Electronics Service Center.

using the Power Cool

For a quick Fridge cool down, use Power Cool function. Press and 

holding the Fridge/Hold 3 sec for Power Cool button for 3 seconds. 

Then, power cool indicator will lit and activate the power cool mode 

independent of fridge set temperature. If you select Power Cool, the 

inside temperature of the fridge will decrease for about two and a half 

hours or until 25°F. just press and holding the button for 3 seconds 

again to cancel the Power Cool mode. Then, indicator will stop lit and 

activate for freezer setting temperature again.

usinG tHE CoLD wAtER DisPEnsER

Press the ice type or water button to select the type of you want

Select this if you want 

to turn ice maker off.